Monthly Archive: October 2014

Partial Guide to Assembling Flat Packs

There are a variety of options when it comes to spicing up one’s home. One can decide to customize their kitchen by removal of the old kitchen cabinets, install new entertainment units or customize the vanity in their bathrooms. There are flat pack products that are specially made to suit these purposes. The flat pack has complete cabinet in parts with holes for screws preinstalled. When one is thinking of getting custom vanities in place, the options are simple. It only involves getting a reputable vendor and buying the flat pack products desired. One need not to be an expert in the cabinetry installation since every flat pack product is accompanied with clear and easy to follow instructions manual. The manual also contains clear pictures for proper guidance towards the whole process of installation. The flat pack products also have a wider variety and designs to suit one’s needs. For instance if one is after custom made entertainment units Sydney, there are flat pack products to suit this need.

Therefore, when making any sort of customizations, whether flat pack kitchens, entertainment or bathroom vanities, it is wise choice to go for the flat pack products. Before buying any flat pack product, there are considerations that one need to bear in mind. Different flat pack sellers have websites where one can get the installation manuals downloaded upon making an order of any flat pack product. The first consideration is on the manual. After getting the manual, one should read through it and establish an area to work in. one should also make sure that they have the necessary tools at their disposal. In this task, getting invitationfor assistance, preferably form a family or friend is not a bad idea.

Unpacking the units and assembling is done each at a time. Before assembling however, it is important to take note of every component indicated in the manual. One should make sure very component on the manual is also available in the pack. During installation, every cabinet should be installed and assembled in a similar manner. Drawers and hinges should be placed correctly according to the positions indicated on the manual. Visit this site for more details about this article.

The manual should be followed correctly for each and very assembling done. It takes an average of 20 minutes for the floor cabinets to be assembled when using a power screwdriver. All the floor cabinets should be assembled and placed according to the plan.

All the floor cabinets should be leveled. This can be achieved through leg adjustments. The largest space between the cupboard’s bottom and the floor should not exceed the height of the kickboard which is averagely 150mm.

The cabinets can be joined together. The top units should not be installed before the splash back, if it will be glued on the wall. The joints on bench tops should be sealed and attached to the floor units. 35mm long chipboard screws can be used to do this. Marking of a line on the wall at one’s preference is then done. Fixing of the wall units follows afterwards. The guide to assembling the flat pack products gives in-depth description on what and how things are done.